Breakthrough engineering in the field of pool purification industry
Swimming pool sanitation and maintenance has remained troublesome and expensive for many years – until now! AQVO Plus has been meticulously developed to offer our customers a one-stop solution to these problems.
AQVO Plus is environmentally friendly and 100% chlorine-free
AQVO Plus guarantees our customers the highest-levels of bacteria and algae protection coupled with the added benefit of AQVO Plus sustaining its magical proprieties even during the most extreme weather conditions.
AQVO Plus is a non-vaporous, stable component, with greatly prolonged properties when compared to alternative chlorine-chemical solutions and without the negative side effects of the older systems and solutions.
A single application of AQVO Plus will keep a swimming pools water crystal clear for up to 7 continuous days (depending on weather conditions and pool loading) thanks to its extremely advanced antibacterial and antiviral proprieties.
$99.00 $69.00
First simply determine the volume of water to be cleansed. Measure the length, width and depth of your pool and multiply them all together to find the volume of water. Your local pool supplier can help you verify your calculation or you can use the on-line calculator provided here: https://www.calculator.net/volume-calculator.html
• The initial dosage of the AQVO Plus agent is 5oz per every 1,000 gallons of swimming pool water (approx. 40ml of the agent per every cubic meter of swimming pool water)
• To maintain concentration, the AQVO Plus solution should be added once every 7 days at the rate of 0.6 Oz of the agent per every 1,000 gallons of swimming pool water (approx. 5ml of the agent per every cubic meter of swimming pool water) depending on weather conditions and the loading of the pool
PLAESE NOTE:
• AQVO Plus should never be used alongside the chlorine-based solutions!
• Heavy rain may cause the level to drop, in this case AQVO Plus agent must be added in a quantity necessary to maintain the concentration level above 40ppm
Depending on the equipment installed in the pool, the time of sanitation will vary from 12 to 24 hours.
To convert a chlorine or saltwater cleansed swimming pool to AQVO Plus chlorine-free maintenance
(In case your pool is brand-new or newly filled with water please proceed to step 2 of the following instruction)
1. Clean D.E. cartridge or sand filters
a) Chemically clean the D.E. screens, cartridge or sand with market available filter cleaner, or replace the cartridge or sand
b) Start the pump and filter, then clean and vacuum the pool. Let the filter run for 24 hours to catch all debris.
2. Dechlorinate pool water
Remove the source of chlorine (sticks, tablets, etc.) and do not add these products anymore. Neutralize chlorine using any of the available dechlorination tablets or liquids or by using the AQVO Plus solution in concentration of 13 Oz of the of the agent per every 1,000 gallons of swimming pool water (approx. 100ml of the agent per every cubic meter of swimming pool water) and confirm that the free chlorine level is 0 with market available chlorine testers.
3. Add the initial dosage of the AQVO Plus agent
The initial dosage of the AQVO Plus agent is 5oz of the agent per every 1,000 gallons of swimming pool water (approx. 40ml of the agent per every cubic meter of swimming pool water). Let the water circulate for 8-12 hours continuously.
This product is suitable to eliminate bacteria and algae, thus making the exploitation of the reservoir convenient and affordable. However, it is still a chemical product and its high concentration can be hazardous. Each application should be performed strictly in accordance with given recommendations.
Here are the important safety measures
FOR EMERGENCY MEDICAL INFORMATION call a local doctor, or dial the number: 1-800-654-6911.
Copyright © 2022 AQVOPLUS. All rights reserved.